DJI DL Guia De Inicio Rapido página 5

Overview*
Example: DJI DL 24mm F2.8 LS ASPH
1
2
3
4
5
Installing a Camera Lens
Please follow the steps below to mount a lens to the camera body. The following instructions
use the DJI DL F24mm F/2.8 LS ASPH lens as an example.
1. Remove the camera body cap.
2. Remove the lens cap and rear cap.
3. Align the two lens mount indexes on the camera body and camera lens, and insert the
camera lens into the camera body.
4. Rotate the camera lens clockwise until you hear a click.
* Each package contains only one DJI DL or DL-S lens, along with a lens cap, lens rear cap, lens
hood, and Balancing Ring. Each lens model is available at the DJI Online Store.
1. Lens Rear Cap
2. Lens
3. Balancing Ring
4. Lens Hood
5. Lens Cap
1 2
1 3 1 1
3