PAPILLON ACHETA Manual De Usuario página 29

3 . ASSEMBLY:
Step 1:
Using the Spacer take Screw, Flat Washer ,Safety Nut and connect to the frame as shown in diagram,
In order repeat this all.
Ensure all nuts and bolts are securely tightened.
Step 2:
Insert the Upper Steel Tubes (2) into the sleeves of
the enclosure net (5) as shown.
Note: Ensure end of steel tube is visible as shown.
Locate Upper Steel Tube (2) over Lower Steel Tube
(1), ensuring the button pin is fully located in the
location hole as shown to prevent disconnection.
Repeat for all poles.
Note: the foam protection may need to be moved to
locate the button pin.