Vehicle Specific Fitting Procedure; Important - Parrot CK3000 EVOLUTION Manual Del Usuario

Remove the audio and power ISO connectors from your car stereo and plug the male ISO
connectors of the hands-free kit into the car stereo. Connect the vehicle's audio and power ISO
connectors to the female ISO connectors of your hands-free kit.
If the car stereo features a mute input, connect the yellow wire of the kit's cable to the car
stereo's mute input. Check the position of your car stereo's mute input before connecting the
yellow wire. If necessary, test the three possible inputs and then select the one corresponding
to the mute input.
Car stereo without ISO connectors:
If your car stereo does not feature ISO connectors, an ISO adapter cable can be used to
simplify the installation of your hands-free kit and your steering wheel control interface. The
ISO adapter can then be used to connect your hands-free kit by adapting to your vehicle's
specific connections. You will find a list of adapter cables on our website at www.parrot.com for
simplifying the installation procedure.
If the car stereo features a mute input, connect the yellow wire of the kit's cable to the car
stereo's mute input. Check the position of your car stereo's mute input before connecting the
yellow wire. If necessary, test the three possible inputs and then select the one corresponding
to the mute input.

VEhICLE SPECIfIC fITTINg PrOCEDUrE

IMPOrTANT :

The wires corresponding to the CAN protocol must be connected correctly to your car stereo's
CAN information. It is important to follow the wiring diagram for your vehicle. We would advise
our customers to have the interface fitted by a professional.
ATTENTION:
DON'T DIRECTLY CONNECT THE ORANGE WIRE OF THE PARROT H/F KIT TO THE IGNITION + 15.
THIS FUNCTION IS ALREADY SUPPLIED BY PARROT MULTICAN UNIT.
Our www.parrot.com website contains a complete, up-to-date base of wiring diagrams for all
Parrot products, specifically covering every make and model.
Note : Bullet terminal female are supplied with the Parrot MULTICAN interface to simplify
the installation of the dedicated CAN protocol wires.
If the purple wire (corresponding to the K-Bus) of the power cable is not used, you are advised
to cut off the male metal contact and insulate the wire to prevent it from shorting with the car's
bodywork.