Fantec ClubSport Steering Wheel F1 Guía Rápida página 3

CENTRE CALIBRATION
3
Press Tuning button
3.1
Turn to centre
3.2
position
Press at the same time to calibrate
3.3
steering wheel centre.
TUNING OPTIONS
5
Press Tuning button
5.1
Navigate using the FunkySwitch
5.2
Go through parameters
or
Change parameter values
Press Tuning button to close Tuning Menu.
5.3
NOTE: Repeat process after firmware update.
TM
SHIFTER CALIBRATION
4
NOTE: Optional. External H-pattern shifter required.
Press the Tuning button and the highlighted
button at the same time. Follow the instructions
on the OLED display.
MODES
6
Short press the highlighted
buttons at the same time.
OLED display will temporarily display the
active mode upon selection.
Repeat
Cycle Modes
Console
GEAR N
SET N -PRESS
LOW RIGHT BTN
PC
2