Thermostat Control - GE RAK348R1 Manual De Propietario

Introduction overview.
THERMOSTAT CONTROL – Front
Toggles display –
Fahrenheit/Celsius
Fan operating status
Fan control
THERMOSTAT CONTROL – Back
Heating and cooling set points will be lost if all of the batteries are removed or depleted. The thermostat
and receiver(s) will remain linked, but the set point temperatures will need to be reset.
F/C
Fan Auto
Fan
Thermostat
opened back
Set A
Set B
COOL
OFF
O
Hold
Set Point
70 O
Heat
Up
Down
Cool
Circuit Board
Set A
Set B
Current room temperature
Operating mode indication –
HEAT, COOL, OFF
RF connection with a control mode
Indicates holding of Set Point
temperature
Current Set Point temperature
Light
Momentary backlight button
Changes operating mode –
HEAT, COOL, OFF
Changes Set Point temp
Thermostat will operate on
either Set A, Set B or both.
When changing batteries,
replace one set at a time to
avoid losing the set point
information. Always replace
with all new batteries. Never
use a mix of old and new.
Battery orientation
is critical.
3