Led Indicators - Axis T864 Serie Guia De Instalacion

AXIS T864 Series Single Channel

LED Indicators

LED
Behavior/color
Coax link Off
On
Flash
Orange/red
Ethernet Off
link
On
Flash
Red
PoE over Off
coax
On
Red (1 flash)
Red (2 flashes)
Red (3 flashes)
Indication
No power
Connection established
Units not detected on coax
Data rate < 100%. The coax
connection has reached power and
range limit. Reduce cable distance or
connect an AXIS T8003 PS57 supply
to the Device unit.
No network connection
Ethernet link established
Network activity on port
10BASE-T connection. Units must be
connected to 100BASE-T (full-duplex)
compatible equipment for effective
operation.
Units not detected
PoE over Coax enabled
Low voltage. Check power supply
type/polarity.
Short circuit. Check for cable faults
and remove legacy video equipment.
Power disconnected due to overload.
16