Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
4
QuickStat-TC Installation & Operation Manual
Programming
The QuickStat-TC comes with a pre-programmed default schedule. The
schedule consists of 4 periods per day which represents a typical week
day.
Period
Description
Wake-up
Away from home
Return home
Sleep
Default Programming
The following shows the pre-programmed default schedule in the
QuickStat-TC.
Period Setting MO
TU
6:00A 6:00A 6:00A 6:00A 6:00A 6:00A 6:00A
8:30A 8:30A 8:30A 8:30A 8:30A --:--
5:00P 5:00P 5:00P 5:00P 5:00P --:--
11:00P 11:00P 11:00P 11:00P 11:00P 11:00P 11:00P
The Comfort (
) temperature is used in periods 1 and 3 and the
Economy (
) temperature is used in periods 2 and 4. For example,
when the period changes from 1 to 2, the setpoint automatically changes
from Comfort (
) temperature to Economy (
Preset Temperatures
The QuickStat-TC comes with 3 preset temperatures shown as Comfort
(
) temperature, Economy (
temperature. The following table shows the intended use and the default
setting of each preset temperature.
Icon Intended use
Comfort
(when at home)
Economy
(when asleep or away from home)
Vacation
(during prolonged absence)
Users can also change a preset temperature by:
1.
Set the desired temperature using the
2.
Press and hold the corresponding preset button (
until the corresponding icon is displayed.
Floor Temperature Limit (AF Mode Only)
The default temperature limits are 41°F to 82°F (5°C to 28°C). These
limits can be changed by:
Standby.
1.
Switch the QuickStat-TC to
2.
Press and hold the
button.
3.
Switch the QuickStat-TC to
On. Continue to press
and hold the
button.
4.
Release the
button when the minimum tem-
perature limit
appears.
5.
Set the minimum temperature limit using the
buttons.
400-115-052
Associated temperature setting
WE
TH
FR
SA
) temperature.
) temperature and Vacation (
A/AF modes F mode
70°F (21°C) 82°F (28°C)
63°F (17°C) 68°F (20°C)
50°F (10°C) 50°F (10°C)
buttons.
,
, or
6.
Press the
button to display the maximum temperature limit
.
7.
Set the maximum temperature limit using the
8.
Press
Mode/Ret to exit.
Modifying the Schedule Programming
The user can change the programming to better meet their lifestyle. To
do so:
1.
Press
Pgm to access the programming mode. Period 1 will be
displayed.
2.
Press
Day to select the day to program for the selected period. To
select the entire week, press and hold the Day button for 3 seconds
until all days are selected.
3.
Press
Hour and Min to set the start time of the selected period, or
SU
press Clear if you want to skip the period (--:-- is displayed).
--:--
Note: If you wish to use only 2 periods, set periods "1 and 4"
--:--
or periods "2 and 3". Early Start will not work if you set periods
"1 and 2" or periods "3 and 4".
4.
Press
Pgm to select another period, or press Day to select another
day. They repeat step 3. Repeat steps 3 & 4 until programming is
complete.
5.
Press
Mode/Ret to exit the programming mode.
Operating Modes
The QuickStat-TC has three operating modes:
)
Automatic Mode
In this mode, the QuickStat-TC follows the programmed schedule. To
place the QuickStat-TC in this mode:
1.
Press the
Mode/Ret button until the
play.
2.
To disable Automatic mode, press the
the mode to Manual mode
Temporary Manual Override (in Automatic Mode
Users can temporarily override the scheduled programming of the
QuickStat-TC. The new temperature setpoint will be used until the
beginning of the next period. To temporarily override the QuickStat-TC:
1.
Press the
,
)
Automatic mode, to the new desired setpoint. Once the new setpoint
is accepted, the
2.
To cancel the temporary override, press the
Manual Mode
In this mode, the programmed schedule is not used and the setpoint
temperature must be set manually. To place the QuickStat-TC in this
mode:
1.
Press the
Mode/Ret button until the
display.
2.
Set the temperature using the
3.
To disable Manual mode, press the
mode to Automatic mode
buttons.
icon appears on the dis-
Mode/Ret button to change
.
or
button, while the thermostat is in the
icon will begin to flash.
Mode/Ret button.
icon appears on the
,
or
button.
Mode/Ret button to change the
.
)
Publicidad
Tabla de contenido
