Philips WardrobeCare GC9940/27 Manual De Instrucciones página 13

2 Press the water tank release button (1) and remove the water tank
(2).
3 Fill the water tank with normal tap water and place the water tank
back into the appliance.
4 Undo the locking strap and unfold the ironing board to vertical
position.
5 Hang your garment for steaming on the hanger hook at the top of
your ironing board.
6 Take the steamer out of the steamer compartment.
7 Switch on the steamer by pressing the steamer power-on button.
The power-on light goes on.
8 Position the steamer head close and facing your garment, then press
the steam activator.
Never direct the steam at people.
Note: Move the steamer head up and down quickly for the best result.
9 If you want to steam in the blowing mode, press the rounded side
of the blowing/suction button. If you want to steam in the suction
mode, press the hollow side of the blowing/suction button.
EnGlIsh
13