Introduction; Product Features; Package Contents; Installation And Setup - Tripp-Lite RELAYCARDSV El Manual Del Propietario

1. Introduction

1.1 Product Features

The RELAYCARDSV communication card provides contact closures for remote
UPS monitoring. To meet different application requirements, the RELAYCARDSV
allows the user to select status of the dry-contact signal (normally closed or
open) by setting the jumper. Typical applications include:
• IBM Server, PC and workstation equipment
• Auto-controlled industrial equipment
and communication applications

1.2 Package Contents

• RELAYCARDSV
• Owner's Manual
• 9-Pin Communication Cable

2. Installation and Setup

2.1 System Requirements

The RELAYCARDSV supports Tripp Lite SmartOnline

2.2 Installation

Step 1: Using a screwdriver, remove the ACC Slot cover located on
the rear panel (SVTX Series) or front panel for Modular systems (SVX-
and SV-Series).
Step 3: Using a screwdriver and screws provided from removing
the ACC Slot cover in Step 1, secure the RELAYCARDSV to the UPS
chassis.
SVTX 400V Non-Modular, SVX 400V Modular, and SV 208V Modular UPS systems.
®
Step 2: Insert RELAYCARDSV into the ACC Slot.
Step 4: Use the 9-pin communication cable to connect UPS and
equipment for remote monitoring and control.
2