These instructions are for installing Transolid
Undermount sinks are sinks that are mounted from below the countertop. If you are
installing another type of sink, such as a Drop-In (Top Mount) sink which is installed on
top of the counter, please refer to instructions specifically for those sinks.
Transolid
recommends that undermount sinks and routering of solid surface material
®
should be installed by a professional installer for best results.
Transolid
undermount sinks should only be fastened to a solid surface countertop
®
(i.e. granite, quartz, marble, stone, solid surface material).
Requirements vary for installation in a granite, marble, stone, or butcher block counter
top. Please contact your fabricator for specific details.
Transolid
is not responsible for sink or countertop if damaged during installation.
®
Remember, it is your responsibility to follow all local plumbing and building codes.
Inspect sink for damage prior to beginning installation. Do not install a damaged unit.
The warranty will be voided if these installation instructions are not followed.
Templates are supplied only as a guide. The physical use of the sink will ensure a more
accurate cutout.
The instructions that follow are for installing a Transolid
Be sure to read all instructions completely before beginning installation.
Eye protection (safety glasses/goggles)
strongly recommended
Ear protection strongly recommended
Undermount template supplied by Transolid
Undermount clips supplied by Transolid.
(NOTE: these come with the sink and are in a
separate plastic bag. Please make sure they are
not thrown away with the carton.)
LEGAL DISCLAIMER
All technical data and information provided in this publication is done as a public service to customrs of Transolid
names, designs, and model numbers of products are trademarks of Transolid
without notice or obligation. Transolid
to provide you with accurate information and descriptions of its products, accuracy and completeness cannot be guaranteed. Transolid
sible for, nor does it have any liability for any mistakes or typographical errors, including liability for incidental, consequential, or special damages. All
products should be inspected and measured promptly upon delivery and certainly before any improvements or alterations are done in anticipation of
or preparation for installation. Transolid
Nothing contained in this publication is to be construed as contractual or providing any form of warranty or representation on the part of Transolid
TRANSOLID
MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY OF MERCHANTABILITY
®
OR OF FITNESS FOR A PARTICULAR PURPOSE, AS TO THE INFORMATION CONTAINED HEREIN OR THE PRODUCTS DESCRIBED HEREIN.
INSTALLATION INSTRUCTIONS
UNDERMOUNT
ATTENTION INSTALLER:
Tools and Materials You will Need
may also change or discontinue models of its products without notice or obligation. While Transolid
®
assumes no liability for the use of such information or for any damages incurred through its use or application.
®
silQgranite
®
undermount silQgranite
®
undermount silQgranite
®
Silicone adhesive sealant (not supplied)
Masking Tape
Slotted screwdriver
Ruler/Tape measure
Drill and drill bit
1-1/4" Hole Saw
Saber Saw (if countertop cutout is required)
. Prices and specifications of Transolid's products are subject to change
®
SINKS
sinks.
®
sink.
®
and consumers of our products. All
®
®
endeavors
®
is not respon-
.
®