RiverRidge 02-253 Instrucciones De Ensamblaje página 9

STEP 3
D
C
8
1. Insert 4 wood dowels (C) into wood dowel holes on legs (8).
2. Attach legs (8) and middle leg (9) to bottom board (6) by inserting wood dowels (C)
into wood dowel holes on bottom board (6), then insert 5 screws (D) through holes on
bottom board (6) and tighten to legs (8) and middle support leg (9).
STEP 4
1. Attach front panel (5) to divider board (4) by inserting cam bolt (A) into cam lock hole on
divider board (4).
2. Insert 1 cam lock (B) into cam lock hole on divider board (4), then rotate clockwise to secure
cam bolt (A) in place.
D
C
8
D
6
9
4
B
5
D
D
C
8
C
8