Helpful Tips; Cleaning & Maintenance - Nostalgia Products VWT2IVY Instrucciones Y Recetas

HELPFUL TIPS

MAKING WAFFLES
Be sure to preheat the toaster before toasting your waffles.
Do not add too many ingredients or mix to your silicon molds - if it is too
thick it may not cook all the way and may leak outside the top.
Allow the waffles to sit in the mold for about 30 seconds after
the toasting cycle has completed to cool off.
BURNING/SMOKING
If your unit is burning or smoking while toasting, press the CANCEL button
to end the toasting cycle, and unplug from the electrical outlet. Remove the
silicon molds from the Toasting Slot and allow unit to cool completely.
Smoking may also be caused by excess crumbs and waffle mix stuck inside the
machine. To prevent smoking, make sure to clean the Drip Tray after each use.
CLEANING & MAINTENANCE
Make sure the unit is unplugged before cleaning. Allow all parts to
COOL to the touch, especially the Silicon Molds and Drip Tray.
To prolong the life of your WAFFLE TOASTER, please follow these simple
instructions for maintenance. Never place the appliance in a dishwasher.
• Do not try to remove waffles if they get jammed inside the
Toasting Slots without first unplugging the toaster.
• Clean outer surface of the toaster with a soft damp cloth and
only when it is unplugged and completely cooled.
• Use soapy water to clean the Toasting Basket before and after use.
• Make sure the toaster is completely cooled before storing or cleaning.
• Unplug the toaster before removing the Drip Tray from the base. Crumbs or
drips in the mechanism must be removed by wiping with a cloth, blowing
or gentle shaking. Drip Tray tray must be cleaned after every use.
• Do not operate toaster without at least one waffle in place.
• Never use the toaster without the silicon mold and Drip Tray in place.
7