Vents PSS Instrucciones De Uso página 2

Please read this manual carefully before installing the product.
Following the requirements of this manual is essential for reliable and trouble-free
EN
operation of the unit throughout the entire service life.
Keep this manual handy over the entire service life of the product since the document
contains the maintenance requirements.
The wall-mounted ventilator enables plenum and exhaust
ventilation for small and medium-sized premises.
The ventilator is mounted on the sunny side of the external
wall of an apartment, cottage, office building etc.
The delivery package includes:
1. Ventilator - 1 piece;
2. Screws with dowels - 8 pieces for PSS 102
(12 pieces for the rest of the models);
3. User's Manual;
4. Box.
Ventilators and solar batteries are mounted on the wall
using screws and dowels (Fig. 1-3).
Ventilator installation consists of several steps:
- Solar battery installation (in case of a remotely
installed battery)
- Ventilator internal unit installation
- Ventilator external unit installation
PSS 102 Installation
Installation of the ventilator external unit and the integral
solar battery - Fig. 4-11
Installation of the ventilator internal unit - Fig. 26-32
Changing the air flow direction - Fig. 18-21.
Ventilator flow section adjustment - Fig. 33-36.
PSS52 102, PSS54 102 and PSS85 102 Installation
Remote solar battery installation - Fig. 12-17.
Changing the air flow direction - Fig. 18-21.
Installation of the ventilator internal unit - Fig. 26-32
Installation of the ventilator external unit - Fig. 43-49
Ventilator flow section adjustment - Fig. 33-36.
PSS810 122 Installation
Remote solar battery installation - Fig. 12-17.
Changing the air flow direction - Fig. 22-25.
Installation of the ventilator internal unit - Fig. 37-42.
Installation of the ventilator external unit - Fig. 50-56.
The solar battery should be oriented perpendicularly to the
sun rays.
Furthermore, all the photocells should receive an equal
amount of sunshine since the output current produced
by the battery is limited by the photocell with the lowest
quantity illumination.
Protect the photocells against possible damage including
scratches as it adversely impacts the amount of light
penetrating the photocells and, therefore, reduces the
output current.
The ventilator, solar battery and built-in fan require periodic
cleaning from dirt and dust.
Clean the surfaces with a soft cloth soaked a detergent
solution.
Avoid penetration of liquid onto the electric motor.
Wipe the cleaned surfaces dry.
To increase the current output make sure that the solar
battery photocell surface is clean at all times.
To clean the photocells just use a clean dry cloth.
2