Monster CLARITY HD ONE Manual Y Garantía página 22

Problem What to do
My Clarity • Carefully check if the back plate of the amplifier is
HD hot. If the monitors have been running at their highest
™
Model One power output for an extended period, the amplifier may
Monitors have overheated and the protection circuitry has
suddenly shut down the monitors temporarily. Your Clarity HD Model One
stopped Monitors provide maximum protection from amplifier
working and overdrive, and overheating. Switch off the monitors
the red LED and wait 30 minutes to let the back plate cool down.
is flashing. Switch the power back on.
• Raise the volume to check they are operating normally.
• If the monitors are still not responding, contact
the dealer you purchased them from, or Monster.
My iPod / • Make sure you have the power cord properly
®
iPhone connected on the back of the unit.
®
does not
• Make sure you have the power cord plugged
charge up.
into a working AC outlet.
• Remove your iPod/iPhone from the dock.
Wait 5 seconds. Then reseat your iPod/iPhone.
21