Publicidad
Idiomas disponibles
Idiomas disponibles
STEP 2 - Figure 2
Attach L-Brackets (M) to the posts on the Left and Right Panels (G and H) using 2 Sunk Bolts (B). Then
line up the holes in the Back Panel (F) and secure using 3 Sunk Bolts (B) from the back on each side.
STEP 3 - Figure 3
Attach Support Bar (K) in the middle
between the Side Panels (I) and secure
with 1 Allen Bolt (A) on each end. Then line
up the holes of the Slat Set (J) with the ones in the
corners oof the Side Panels (H) and secure them with 4
Wood Screws (C). Tighten all screws with Philips head
screwdriver (not included). Tighten all bolts with Allen Wrench (D)
provided. The assembly is now complete.
CARE & MAINTENANCE: The touch of a soft cloth is all the maintenance the finish will ever need. Please do not use harsh or abrasive cleaners for polishing,
as they may cause damage to the finish. Periodic checks are recommended to make sure that all hardware is securely tightened.
COMFY DAYBED
Model #1864-010/020
G
F
H
C C
J
I
G
C C
K
A A
D D
Date: 07-13-2016
M
B B
B B
FIGURE 2
B B
B B
B B
F
H
FIGURE 3
A A
D D
C C
Page 2 of 2
C C
Publicidad
