Rev-A-Shelf RV Serie Instrucciones De Instalación página 2

STEP 4
Place the frame inside of your
cabinet and snap the handle
onto the frame.
NOTE: Look to make sure
that there is plenty of
clearance to shut the door
(See Figure C).
STEP 5
With the frame in a closed
position, insert the front (2) #8
x 3/4" screws, making sure that
the framework is square to the
front of the cabinet (See Figure
D).
STEP 6
If there is sufficient clearance,
install rear screws. If
framework prevents access
to rear screws, remove frame
work by pulling out and lifting
frame from slides (See Figure E).
Finally, place your waste
containers in the wire frame
(See Figure F).
2
FIG. C
FIG. D
FIG. E
Snap handle onto the frame
FIG. F
12400 Earl Jones Way
Louisville, KY 40299
rev-a-shelf.com
Customer Service: 800-626-1126