Operation; Cleaning, Care & Maintenance; Troubleshooting - Buffalo D637 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 21
Telephone Helpline: 0845 146 2887 (United Kingdom)

Operation

WARNING: The top of the appliance can become hot
during use.
Connect the appliance to the power supply.
1.
Set the Temperature dial to the desired level:
2.
MIN (20°C) to MAX (90°C).
Place the crockery in the appliance.
3.
Turn the appliance On. Ensure the door is closed.
4.
Note: The appliance takes approximately 30 minutes to
reach maximum temperature.
A click can be heard when the appliance reaches the set
5.
temperature.
There are various factors that affect heat-up times (crockery
6.
thickness, quantity, door opening/closing etc.) Therefore it is not
possible to state precise times.
However, as a guide when fully loaded with an approximate temperature of 60°C the appliance will
take 30-40 minutes to heat up the crockery.
WARNING: Always remove crockery from the appliance with suitable protective gloves
after warming. The crockery and interior cabinet can become very hot.
Cleaning, Care & Maintenance
Use warm, soapy water and a damp cloth to clean the appliance.
Dry thoroughly after cleaning.
A BUFFALO dealer or qualified technician should carry out repairs if required.

Troubleshooting

If your BUFFALO appliance develops a fault, please check the following table before making a call to the
Helpline.
Fault
The unit is not working
Appliance does not reach set
temperature
Probable Cause
The unit is not switched on
Plug and lead are damaged
Fuse in the plug has blown
Power supply
Internal wiring fault
Faulty thermostat
Faulty element
20°C
MIN
1
0
Action
Check the unit is plugged in correctly
and switched on
Call BUFFALO agent or qualified
technician
Replace the plug fuse
Check power supply
Call BUFFALO agent or qualified
technician
Call BUFFALO agent or qualified
technician
Call BUFFALO agent or qualified
technician
UK
90°C
MAX
2

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido