General Instructions - Seac Sub Diamond Ice Instrucciones

Congratulations for choosing the
quality and reliability of a Seac Diving
Pro product. The equipment you bought
was produced using selected and tested
materials. Our constant evolution
results from continuous research and
development. Innovative production
processes, constant testing and actual
functionality tests developed at our
research centre guarantees the
reliability characterizing all Seac Diving
Pro products.
Warning!
This booklet is not a diving manual!
Read the whole instruction
handbook before using this
equipment!
This manual for use must be
preserved for the whole life of the
product!

General Instructions

Before using the regulator or any other
products for underwater diving, you
should attend a course held by qualified
instructors and obtain the relevant diving
certificate. The use of diving equipment by
non certified divers is dangerous and can
lead to serious accidents, or even death, to
the diver and his/her diving mates.
During the assembly and regulation of the
regulator, every step was taken to ensure
high reliability of the product in time.
These steps however may become ineffec-
tive if the regulator is not used correctly and
if adequate maintenance is not provided.
Seac Diving Pro s.r.l declines any liability
for any problem arising from non-compli-
ance with the instructions contained in
this handbook.
Introduction
For any other problem, please contact your
dealer or directly Seac Diving Pro. Only la-
boratories authorized by Seac Diving Pro
may carry out repairs or maintenance.
Seac Diving Pro diving regulators are the
result of a research carried out in close co-
operation with many professional divers.
Their innovative features ensure a reliabi-
lity which remains unchanged even after a
long series of dives. At the same time, their
easy mechanics and operation allow an ex-
tremely simple maintenance.
If you are not experienced in the use of
this equipment, we strongly advise you to
get familiar with its operation during test
diving in shallow waters and under favora-
ble conditions; if needed, contact a quali-
fied instructor for a refresher course.
This diving regulator has been certified ac-
cording to standard EN 250: 2000 which
provides a long series of functional tests
up to a maximum depth of 50 meters and
at a temperature of 4 degrees centigrade
(test tolerance range -2°C/ +0°C).
This diving regulator has been designed to be
used with normal atmospheric air complying
with the specifications of standard EN 12001.
Do not use this or any other product of the
Seac Diving Pro line with other gases or oxy-
gen enriched air mixtures (usually known as
NITROX). Failure to follow this recommenda-
tion could cause serious accidents or even
death, due to fire or explosions, or seriously
damage your equipment.
Warning!
Danger!
15