Hilti PSA Serie Manual De Instrucciones página 25

4. If the following equipment exists, also take this action:
PSA 82
▶ Make sure the system to be charged is standing securely.
▶ Insert the battery in the tool. → page 17
▶ Open the charging cord socket on the upper side of the monitor.
▶ Connect the PUA 81 AC adapter to the charging cord socket.
◁ The battery is charging
Note
You can charge the PSA 82 battery in the tool no matter whether the tool is switched on or off.
Alternatively, you can charge the PSA 82 battery with the PSA 85 charger (available separately)
or with the PUA 82 motor vehicle power adapter. The PSA 85 charger is used to charge the
battery when it is not in the tool. The PUA 82 motor vehicle power adapter is used to charge
the battery when it is in the tool.
▶ When the battery is fully charged, disconnect the AC adapter.
◁ The LED lights green.
▶ Close the charging cord socket.
5. If the following equipment exists, also take this action:
PSA 82
▶ Make sure the system to be charged is standing securely.
▶ Remove the battery. → page 17
▶ Insert the battery in the PSA 85 charger.
◁ The battery is charging
▶ When the battery is fully charged, remove the battery from the charger.
▶ Insert the battery in the tool. → page 17
6. If the following equipment exists, also take this action:
PSA 83
▶ Make sure the system to be charged is standing securely.
▶ Insert the battery in the tool. → page 17
▶ Connect the PUA 85 19V AC adapter to the charging cord socket at the side of the tablet.
◁ The battery is charging.
▶ Disconnect the charger when the battery is fully charged.
◁ The LED lights green.
6 Care and maintenance of cordless tools
WARNING
Risk of electric shock! Attempting care and maintenance with the battery fitted in the tool can lead
to severe injury and burns.
▶ Always remove the battery before carrying out care and maintenance tasks!
Care and maintenance of the tool
• Carefully remove any dirt that may be adhering to parts.
• Clean the air vents carefully with a dry brush.
• Use only a dry cloth to clean the housing. Do not use cleaning agents containing silicone as these may
attack the plastic parts.
Care of the lithium­ion batteries
• Keep the battery free from oil and grease.
• Use only a dry cloth to clean the housing. Do not use cleaning agents containing silicone as these may
attack the plastic parts.
• Avoid ingress of moisture.
Maintenance
• Check all visible parts and controls for signs of damage at regular intervals and make sure that they all
function correctly.
Printed: 29.09.2017 | Doc-Nr: PUB / 5070487 / 000 / 05
English 19