Westinghouse Sidemount Plus 01240-00 Manual De Instrucciones

All Sidemount Plus® products are UL listed for fan support and exceed the requirements of the National Electric
Code for fans and fixtures weighing up to 70 lbs.
INSTRUCTIONS FOR NEW CONSTRUCTION
Turn off electrical power at breaker!
1. Mount bracket to joist using the two wood screws provided (Figure 4).
NOTE: For ⁄ " sheetrock, flush the bottom step of bracket to the bottom of the joist. For
1
2
bracket to the bottom of the joist (Figure 3).
INSTRUCTIONS FOR REMODEL INSTRUCTIONS
Turn off electrical power at breaker!
Remove old box and bracket if applicable.
1. Separate the sidemount bracket from box by removing the two nylon insert locknuts inside the box (Figure 1). Insert
sidemount bracket into 4" ceiling hole, position according to sheetrock thickness (Figure 2).
NOTE: For ⁄ " sheetrock, flush the bottom step of bracket to the bottom of the joist. For
1
2
of bracket to the bottom of the joist (Figure 3).
2. Mount sidemount bracket to joist using the two wood screws provided (Figure 4).
3. Pull wire into box through one of the knockouts and remount the box to the sidemount bracket using the two nylon insert
locknuts (Figure 5). Do not overtighten locknuts.
4. Adjust length of wire in box and secure using the single clamp provided or other strain relief supplied by the installer.
5. Mount fan bracket or fixture mounting bar (heavier fixtures or chandeliers) to the threaded post using the #10-24 bolts
provided. Mount cover plates or lightweight fixtures to the box ears using #8-32 screws (not provided). Complete
installation according to fan or fixture manufacturer's instructions.
Figure 1
Figure 5
Westinghouse Lighting, Philadelphia, PA 19154-1029, U.S.A.
www.westinghouselighting.com
, WESTINGHOUSE, and INNOVATION YOU CAN BE SURE OF
are trademarks of Westinghouse Electric Corporation.
Used under license by Westinghouse Lighting.
All rights reserved.
Made in China
Figure 2
Ceiling Fan and Fixture Support
MODELS 01240-00, 01240-08
⁄ " sheetrock, flush the second step of
5
8
⁄
5
8
5/8
1/2
Figure 3
01240-11, 01250-00
01250-08, 01250-11
" sheetrock, flush the second step
Figure 4