Philips SalonStraight Freestyle HP4681/17 Manual De Instrucciones página 10

EnglisH
10
styling with the straightening attachment
1 Take a section that is 3-4cm wide. Place it between the
straightening plates and press the handles of the appliance firmly
together.
 Slide the straightener down the length of the hair for 5 seconds,
from root to hair end, without stopping to prevent
overheating (Fig. ).
 Repeat this process after 0 seconds until you have achieved the
desired look.
 Let your hair cool down. Do not comb or brush it before it has
cooled down, as this would ruin the hairstyle you have just created.
Styling with the attachment for twists and flicks
1 Decide if you want to create inward or outward flicks. Hold the
appliance in such a way that the curved plates will create the
desired type of flick.
 Take a section that is approximately 3-4cm wide.
 Place lock between the plates approx. -5cm above the hair ends
and press the handles of the appliance firmly together.
 Slide the styler gently down the length of the hair in a few seconds.
When the plates are -5cm above the end of the lock, slightly twist
the appliance in the direction of the desired flicks to get an optimal
effect. Don't stop while you slide the styler down the lock
to prevent overheating (Fig. 5).
5 Repeat this process after 0 seconds until you have achieved the
desired look.
6 Let the hair cool down. Do not comb or brush it before it has
cooled down, as this would ruin the hairstyle you have just created.