Publicidad
Idiomas disponibles
Idiomas disponibles
Trouble Shooter
If the MS Tail Docker does not work well, it could be that there is air in the gas cylinder. This can be caused by repeated re-
filling, when a little air gets in each time.
The solution is simple:
1.
Hold the Tail Docker with the filling point upwards, and press on the refill nozzle with a small object.
2.
Continue to hold it in until liquid gas escapes.
3.
Allow it to return to ambient temperature (as gas escapes, it will become cold)
4.
Once it has regained ambient temperature, refill with gas again.
NB. Always hold the Tail Docker blade downwards when refilling.
If the blade becomes loose, remove the burner and cylinder from the chassis, light it, and let it warm up for several minutes
until the metal parts are hot. Turn off the burner, and re-tighten the screw in the fixing ring. When it cools down, it will no
longer move.
8
Publicidad
