Publicidad
Idiomas disponibles
Idiomas disponibles
Before using your new Steren´s product, please read this instruction manual to prevent any
I M P O R T A N T
The instructions of this manual are for reference about the product.
There may be differences due to updates.
Please check our website (www.steren.com) to obtain the latest
version of the instruction manual.
C A U T I O N S
1. - Keep your board away from any wet surface to avoid any damage in the device.
2. - Hang the board in a wall to avoid any slip.
3. - Make sure the board connector is in good condition.
4. - Plug into 110 volts AC outlets, if the current peaks occurr connect a current
regulator to prevent possible damage to the device.
5.- Use only markers for glass or acrylic. Do not use whiteboards markers, they will
more difficult to remove.
6. - Clean the screen with a dry cloth when the marker ink is dry.
7. - Turn the board off when not used.
H I G H L I G H T S
The LED board allows you to make advertising handwriting with a neon light style
-with the help of the LEDs and using the special markers.
It can be programmed to display one single colour or colour sequence: red, green,
blue or combinations. It is very easy to configure with the included remote control.
• 45.5 cm lenght x 45 cm height x 4 cm width.
• Fixed colour illumination.
• Colour sequence.
• Colour effects.
PACKAGE CONTENT:
• LED board.
• Voltage converter.
• Cleaning cloth.
• Markers.
• Remote control.
R E M O T E C O N T R O L
damage.
1.- Increases light intensity when fixed
color and increases change velocity when
sequences.
2.- Reduces light intensity when fixed color and
reduces change velocity when sequences.
3.- OFF: Turn off the board.
4.- ON: Turn on the board.
5.- FLASH: Enables changing lights in a 3 base
color faster effect.
6.- STROBE: 3 color fade change.
7.- FADE: 7 color sequence in fade.
8.- SMOOTH: 7 color sequence.
9.- COLOR BUTTONS: Press a color button to show that color on the screen.
H O W T O I N S T A L L B A T T E R I E S I N T H E R E M O T E C O N T R O L
1. - Pull out the battery compartment behind
the remote control to open it.
2. – Place a CR2025 battery.
3. – Replace the compartment.
O P E R A T I O N
1.- Remove the protective plastic from the front side of the board and clean it with a
dry cloth.
2.- Hang the board in a wall using the strap located in the back part.
3.- Plug the adapter to the board and the other end to an electrical outlet.
4.- Turn it on the board using the
remote control.
5.- Before you use the marker, shake
it and press the tip softly in order to let
the ink flow.
6.- Write anything you want from
letters to drawings, in any size and
shape.
When you finish drawing, make sure to cover the tip until you hear a "click",
otherwise the tip will be dry and useless.
Clean the acrylic on both sides, please remove the plastic screws (located at the
corners of the board) very carefully.
T R O U B L E S H O O T I N G
• Make sure the board connector is in good condition.
The board doesn´t
• Check if the battery from remote control has been placed
turn on
correctly in the compartment.
The marker
• Use only glass or acrylic markers.
doesn´t
• Use a dry cloth and remove the marker ink when it is
remove completely
already dry.
S P E C I F I C A T I O N S
Input: 12 V - - - 1 A
Voltage converter:
Input: 100-240 V~ 50/60 Hz 300 mA
Output: 12V - - - 1 A
Remote control:
3 V - - - (CR2025)
Power consumption: 120 Wh/day (10h x day)
Stand-by power consumption: not applicable
Product design and specifications are subject to change without notice.
Product: Fluorescent LED board
Part number: PIZ-100
Brand: Steren
This Steren product is warranted under normal usage against defects in workmanship and materials to the original purchaser for one year from
the date of purchase.
1.- This warranty card with all the required information, invoice or purchase ticket, product box or package, and product, must be presented when
warranty service is required.
2.- If the product stills on the warranty time, the company will repair it free of charge.
3.- The repairing time will not exceed 30 natural days, from the day the claim was received.
4.- Steren sell parts, components, consumables and accessories to customer, as well as warranty service, at any of the addresses mentioned later.
THIS WARRANTY IS VOID IN THE NEXT CASES:
If the product has been damaged by an accident, acts of God, mishandling, leaky batteries, failure to follow enclosed instructions, improper repair by
unauthorized personnel, improper safe keeping, among others.
a) The consumer can also claim the warranty service in the purchase establishment.
b) If you lose the warranty card, we can reissue it, if you show the invoice or purchase ticket.
RETAILER INFORMATION
Name of the retailer ____________________________________
Address _____________________________________________
Product ______________________________________________
Brand _______________________________________________
Serial number _________________________________________
Date of delivery _______________________________________
In case your product fails or have questions, please contact your nearest dealer. If you are in Mexico, please give a call to our Call Center.
WARRANTY
CONDITIONS
01 800 500 9000
Publicidad
