Publicidad
Idiomas disponibles
Idiomas disponibles
Tools
X
Multipurpose brush
y
Multi-purpose nozzle
z
crevice tool
Using for the first time (page 40)
Before using the appliance, remove the elements protecting
the dust container B and connect the hose to the handgrip.
Using the appliance (page 41)
Adjust the length of the telescopic tube, attach the tool suita-
ble for the cleaning to be done and turn the appliance on.
EPS - Electronic protection system
the eps device is activated when the filters are clogged. the
Q light flashes.
If you continue to use the appliance once the light has come
on, the vacuum power is reduced automatically. this is a safety
device to avoid damage to the motor.
to start cleaning again, turn the appliance off, empty the con-
tainer and proceed cleaning (cleaning, pag. 42).
the appliance does not come on.
the impeller turns slowly or not at all.
the lid of the appliance cannot be
closed.
the vacuum power of the appliance drops
and the light Q flashes.
Use - Cleaning - Park system
Cleaning (pag. 42)
to keep the appliance vacuuming efficiently, the filter of the
dust container, the HepA filter and its protection should be
cleaned whenever the eps is activated or at least once every
six months. Before reinserting the impeller sponge filter, make
sure it is dry.
Warning: If you need to immediately use the appliance,
brush and shake the filters, without carrying out the
washing.
Park system (pag. 41)
If you have to interrupt cleaning for a brief period, the applian-
ce has a convenient hose "parking" system. Insert the bracket
on the brush joint into the housing on the bottom of the ap-
pliance.
It is not plugged into the mains socket.
the first time you use the appliance, it is nor-
mal for the impeller to rotate slowly.
something is blocking the impeller.
filters are clogged.
the dust container is not inserted correctly.
filters are clogged or the hose is blocked.
7
Troubleshooting
plug into the mains socket.
extract and open the container. remove the
elements blocking the movement and make
sure the internal rotating supports turn freely.
clean the appliance (page 42) even if the eps
device has not interveened.
extract and insert the container, aligning it
correctly in the appliance. When the container
is positioned correctly, you will hear a click
when the appliance is closed and the buttons
Q are released.
empty the container and clean the appliance.
Make sure the hose is not blocked and if neces-
sary remove the obstructions.
en
en
Publicidad
