Basic Features
size
: Your cable box/satellite receiver
■
P.MODE
may have its own set of screen sizes as
well. However, we highly recommend
you use 16:9 mode most of the time.
16:9: Sets the picture to 16:9 wide
mode.
Zoom1: Use for moderate magnification.
Zoom2: Use for a stronger magnification.
Wide Fit: Enlarges the aspect ratio of the picture to fit
the entire screen.
MTS
4:3: Sets the picture to basic (4:3) mode.
✎
Do not watch in 4:3 format for a long time. Traces
of borders displayed on the left, right and center
of the screen may cause image retention (screen
burn) which are not covered by the warranty.
screen Fit: Displays the full image without any cut-off
when HDMI (720p / 1080i / 1080p) or Component
(1080i / 1080p) signals are input.
✎
nOTE
x
After selecting
Zoom1, Zoom2 or Wide Fit:
1. Press the ► button to select Position.
2. Press the EnTERE button.
3. Press the ▲ or ▼ button to move the picture up
or down.
4. Press the EnTERE button.
5. Press the ► button to select Reset.
6. Press the EnTERE button to reset the picture
to its default position.
x
After selecting
screen Fit in HDMI (1080i/1080p) or
Component (1080i/1080p) mode, you may need to
center the picture:
1. Press the ◄ or ► button to select Position.
2. Press the EnTERE button.
3. Press the ▲, ▼, ◄ or ► button to move the
picture.
4. Press the EnTERE button.
5. Press the ◄ or ► button to select Reset.
6. Press the EnTERE button.
x
HD (High Definition): 16:9 - 1080i/1080p (1920x1080),
720p (1280x720)
x
Settings can be adjusted and stored for each
external device you have connected to an input on
the TV.
Input source
ATV, AV,
Component (480i, 480p)
DTV(1080i),
Component (1080i, 1080p),
HDMI (720p, 1080i, 1080p)
PC
16
English
CC
MEDIA.P
D
Picture size
16:9, Zoom1,
Zoom2, 4:3
16:9, 4:3, Wide Fit,
screen Fit
16:9, 4:3
Digital noise Filter (Off / low / Medium / high / Auto
■
P.SIZE
/ Auto Visualization): If the broadcast signal received
by your TV is weak, you can activate the Digital noise
Filter feature to reduce any static and ghosting that may
appear on the screen.
✎
When the signal is weak, try other options until the
best picture is displayed.
Auto Visualization: When changing analog channels,
displays signal strength.
✎
Only available for analog channels.
✎
When bar is green, you are receiving the best
possible signal.
MPEg noise Filter (Off / low / Medium / high /
■
Auto): Reduces MPEG noise to provide an improved
picture quality.
✎
Disabled under
hDMI Black level (normal / low)
■
level on the screen to adjust the screen depth.
✎
Available only in
Film Mode (Off / Auto1 / Auto2)
■
automatically sense and process film signals from all
sources and adjusts the picture for optimum quality.
✎
Available in TV, AV, COMPONENT (480i / 1080i)
and HDMI (480i / 1080i).
Auto Motion Plus (Off / Clear / standard / smooth
■
/ Custom / Demo): Enhances motion in fast moving
scenes.
✎
The info screen on your TV displays the resolution
and frequency of the incoming video signal
(60Hz). This displayed frequency is not what the
TV is displaying by using the Auto Motion Plus
function.
Auto Protection Time (2 hours / 4 hours / 8 hours
■
/ 10 hours / Off): If the screen remains idle with a still
image for a certain period of time defined by the user,
the screen saver is activated to prevent the formation of
ghost images on the screen.
Picture Reset (OK / Cancel)
Resets your current picture mode to its default settings.
PC mode.
: Selects the black
hDMI mode.
: Sets the TV to