Ega Master 65513 Manual De Instrucciones página 4

CONTROLLING PANEL
ON/OFF BUTTON
Push the button to power on or off the instrument.
POWER INDICATOR LAMP
Lamp lighted means powering on.
Lamp extinguished means powering off.
Lamp flashing means low voltage.
or
MODE BUTTON
Power on and instrument will rotate continuously.
If push once, the level scans in small range.
If push twice, the level scans in large range.
If push three times, the level provides laser horizontal point.
If push four times, the level returns to the state of rotating continuously.
SCAN MODE INDICATOR LAMP
Stable light means continuous rotation and blinking light means scan.
UP/DOWN BUTTON
In continuous rotation mode
In continuous rotation mode, if push up the button the speed of the rotating up, and if push
down the button the speed of rotating down.
In scan mode
In scan mode, if push up the button the whole scan range shifts clockwise, and if push down the
whole scan range shifts counterclockwise.
OPERATION INSTRUCTION
Working horizontally
This working state features to project a laser horizontal plane reference with a plumb laser line
upwards. It can be used to calibrate plumbing in such applications as followings: to lay out the
floor, to level the ground, to install framework of doors and windows and to install drop ceiling.
a) Placement
It would be better to use with an adjustable tripod together.
To be set on a normal tripod directly.
To be placed on a fixed platform or ground.
To be set on wall mount.
To be set on adjustable mount.