Daewoo DCool 3601TR-S Manual Del Usuario página 6

2. POWER: Turn the FAN on by pressing the 'POWER' button; Turn
the FAN off by pressing the 'POWER' button again.
3. SPEED: You can adjust the fan speed to the desired level: low (I),
medium (II), or high (III) by pressing 'SPEED' . The speed setting
is displayed on the LED panel (shown in FIGURE 4) ..
4. MODE: Pressing the ' MODE' button will set the FAN into
NORMAL (NM), NATURAL (NT), and SLEEP (SL) mode .
5. TIMER: The fan is equipped with a timer that allows you to set it's
length of operation from 0.5 hour to 7.5 hours.
6. OSC: Pressing the 'OSC' button will start and stop the oscillation
function. The symbol is displayed on the LED panel.
MAINTENANCE
1. This can only be done by an authorized service agent such as your local
Sealer dealer or any agent qualified to undertake electrical repairs.
3. If the unit requires external cleaning make sure it is switched off and
unplugged from the mains supply. Use a soft tissue or cloth for general
PAGE 6/7
(FIGURE 4)