Installation - Tripp-Lite SmartRack SRCOOL7KDUCT El Manual Del Propietario

Installation

Before proceeding to install the SRCOOL7KDUCT, first make sure the air conditioning unit is correctly installed per the
instructions shown in the SRCOOL7KRM Owner's Manual.
1
Fasten the Manifold Assembly to rear of SRCOOL7KRM using the
four (4) included M4 screws.
2
Attach the Short Flexible Tube to the Manifold Assembly by
turning the tube's threaded end into the manifold's adapter.
3 Attach the Short Flexible Tube to the Tube Adapter by turning the
adapter onto the tube's threaded side.
4 Attach the Tube Adapter to the inside of the perforated rack
enclosure door .
A
Note: The Tube Adapter uses internal magnets to attach to the rack
enclosure.
1
2
3
4
3
A