ASSEMBLY INSTRUCTIONS
4. Put the 20 lb. propane gas tank (not included)
into the tank holder ( ). Turn the wing screw on
I
the outside of the tank holder ( I ) clockwise to
tighten the tank into the tank holder.
DANGER
Propane tank must be a minimum of 60 inches
away at all times.
5. Turn the cylinder valve on the tank
clockwise to close the propane tank.
Attach the regulator to the cylinder valve
by turning the regulator coupling nut
clockwise. Make sure it is fastened
securely and tighten connections by
hand only.
6
. Pour the lava rocks (J) into the
middle of the firebowl body (A) evenly.
WARNING
To ensure proper function, the guard
(F) on the burner should be free of
lava rocks (J) at all times.
N N N
o o o e e e t t t : : : Make sure that the holes on the
inside wall of the rebowl body (A) stay
unclogged of lava rocks.
Keep away from the unit and have the unit
to burn 20 minutes for the first time use.
Always ensure that lava rocks/pumice stones/
LavaGlass
are completely dry before use.
®
Failure to do so will cause them to crack
or pop.
Bond Manufacturing Co., Inc. | Page 8
CYLINDER VALVE
BLACK COUPLING NUT
turn clockwise to connect
REGULATOR
J
A
I
PRESSURE
RELIEF VALVE
BLEED-OFF
VALVE
turn clockwise
to reseal
F