Beaba lotus 2015 Folleto De Instrucciones página 4

BÉABA has developed a bath and room thermometer to ensure that
babies are kept at the right temperature all the time (look at the chart
for the appropriate temperatures). The high precision Lotus (± 0.1°C)
will blend into your bathroom or your baby's bedroom.
IT IS VITAL THAT YOU READ THE INSTRUCTION LEAFLET PRIOR
TO USING THE DEVICE. KEEP THE LEAFLET AND PACKAGING IN A
SAFE PLACE AS THEY CONTAIN IMPORTANT INFORMATION.
HOW TO USE LOTUS
• When you use Lotus as a bath thermometer, put it in the bathtub and
let it float in the water.
• We advise you to swirl the bath water thoroughly before taking the
temperature so that you get the most accurate reading.
• When you use it as a room thermometer, place it in the bathroom or
baby's bedroom and it will give you the room temperature reading
in a few seconds.
• Lotus works using CR2032 type lithium batteries supplied.
• To replace it, remove the measurement unit from its casing by turning
it 90 degrees to the left.
• To replace them, take the measuring unit out of its housing by
stretching the soft edges of the Lotus.
• Then lift off the battery compartment cover and gently remove
batteries using pliers. Insert the new batteries and close the cover.
• You are advised to smear silicone grease on the edge of the battery
housing to make it more watertight.
• Always check that the seal is positioned on the lid before reinserting
it.
• Always check that the battery cover is closed properly before using
the product.
Notice lotus 2015 v2.indd 4
PLEASE READ THIS NOTICE CAREFULLY AND KEEP FOR
FUTURE REFERENCE.
16/10/2015 10:13