Connection; Connecting Audio/Video Signals - BenQ RP790 Manual De Instrucciones

Connection

Connecting audio/video signals

Pay attention to the following notes when you connect cables:
• Please turn off all devices.
• Familiarize yourself with the audio/video ports on the display and the devices you want
to use. Be aware that incorrect connections may adversely affect picture quality.
• Do not remove cables from the ports by pulling the cable itself. Always grasp and pull the
connectors at the end of the cable.
• Ensure that all cables are fully inserted and frmly seated.
Connecting the VGA input
1. Connect the VGA jack on the display to the VGA output jack on a computer using a
D-Sub (15-pin) cable.
2. Connect the computer's audio output jack to the AUDIO jack on the display using a
suitable audio cable.
3. To view images from this input, press the input button on the remote control and
select VGA .
The audio cable is not supplied and should be purchased separately.
VGA (15-pin) cable
Computer
Audio cable
Connection 13