Worldcast Systems ECRESO FM 5kW Guía Rápida página 13

• Connect the Dummy Load 1 D-sub 9 pin cable at the rear of the Dummy Load 1 (SY01370-A0), before
inserting the load in the 3 RF connectors at the top of the combiner. The position of the jumper (1-2)
identifies Dummy Load 1. Screw the load onto the cabinet.
Dummy Load 1 cable
DUMMY LOAD 1
• Set the rear panel (MX01410) on the cabinet.
Jumper (1-2)
English version
13