English version
• As standard, a mains cable is set to exit underneath the cabinet.
If needed, you may feed it through the roof-top cable gland:
380 VAC
Connector panel at the rear of the cabinet
• Open the rear door
• As standard, a mains cable is set to exit underneath the cabinet.
If needed, you may feed one through the roof-top cable gland:
380 V
AC
The supplied cable can be directly connected to the mains.
• You may also use your own cable which will need to hooked to the connector panel (cable
specification: H07RNF, between 5x4mm
8
380 VAC
Or
380 V
Or
2
2
and 5x16mm
depending on required length):
Clamps
AC