Programming Procedure - Hoppe SecuSignal Instrucciones De Montaje Y Servicio

7. Programming procedure

Please set the receiver to programming mode.
8. Information about the radio range
When the window handle is operated, the radio signal is sent several
times in quick succession to ensure that transmission is successful.
Signal range inside a building is up to 30 metres. Thanks to advanced
technology, SecuSignal operates using low transmission power
®
which makes the system totally harmless with regard to electric smog.
However, structural factors may occasionally impede the range.
Special signal repeaters can be used in order to avoid signal malfunc-
tions with SecuSignal .
®
Wooden walls, glass
Brick walls
and plasterboard
5 - 20% loss 20 - 40% loss
Important: Adverse electromagnetic conditions may cause
malfunctions in radio signal transmission. More tips on radio range
planning are available at www.hoppe.com.
16
Reinforced concrete Metal walls
walls
40 - 90% loss 90 - 100%
9. Technical data
"SecuSignal System", compatible with EnOcean
®
Frequency
Bandwidth
ASK modulation
Transmission rate
Max. transmission power
Storage temperature
Operating temperature
Maximum permitted relative air humidity is 80%, non-condensing
10. Disposal
The symbol on the product indicates that it must not be
disposed of as normal domestic waste. Users are obliged
to dispose of old devices at collection points for old elec-
trical and electronic devices. Waste sorting and proper
disposal of your old devices will make a contribution to-
wards maintaining natural resources and will ensure that
materials are recycled. In turn, this protects people's health and the
environment. Information on where you can fi nd collection points for
your old devices is available from your city council, local waste dis-
posal companies or the shop where you purchased the device.
®
868.3 MHz
280 kHz
(amplitude-shift keying)
120 kbps +/- 5%
10mW EIRP
-20 °C to +65 °C
+ 5 °C to +40 °C
17