Orient PRO SATURATION SEL02001M0 Manual De Instrucciones página 27

MODELS WITH SCREWED-DOWN CROWN
This type of watch has a screwed-down crown.
Operate this type of watch as follows:
(1) Before setting the date and time, first turn the crown to the left to loosen
the screw lock.
(2) After setting the date and time, turn the crown to the right while pressing
in, until it stops turning to securely tighten the screw.
HOW TO SET THE TIME & DATE
[How to set the time]
1 Turn the crown counterclockwise to loosen the screw lock.
Pull the crown out to the second click
when the hand reaches the 12 o'clock
position. (Second hand stops.)
2 Turn the crown clockwise and set the
current time.
Since this watch comes with a calendar,
be sure to set either a.m. or p.m.
The date changes at [twelve o'clock
midnight].
When setting the time, first bring the
hand back slightly later than the actual
time and then move it forward to the
actual time.
3 Press the crown in to the unscrewed
position.
After adjusting the time, turn the crown
clockwise while pressing in until it stops
turning to tighten the screw securely.
Turn Turn
clockwise clockwise
27