Twin-Star International 26MM1754 Instrucción De Montaje página 8

9. PLEASE READ ALL "ELECTRIC FIREPLACE
INSERT" INSTRUCTIONS PRIOR TO INSTALLING
ELECTRIC INSERT IN YOUR COMPLETED
FIREPLACE MANTEL. INSTALL THE INSERT IN
YOUR FIREPLACE CLOSE TO ITS FINAL
POSITION.
Lift insert carefully into the back of the unit and
center in the insert opening. Do not drag insert
across hearth/base (A) as it may scratch the unit.
Screw the Bolt (AA) through the Plastic Connector
(BB) to the Securing Block (P) and tighten.
Attach the Securing Block (L) using Bolts (AA) and
Plastic Connector (BB) through the pre-drilled holes
in the Hearth/Base (A).
MOVE YOUR COMPLETED UNIT ONLY SHORT
DISTANCES. MOVE COMPLETED UNIT WITH
GREAT CARE. IT TAKES TWO PEOPLE TO MOVE
COMPLETED UNIT INTO ITS FINAL POSITION.
Hardware Used
AA
Bolt
BB
Washer
Fig. 9
Completed
Unit
x 2
x 2
7
Install
Insert
From
Back
Electric
Fireplace Insert
P
BB
AA
07/06/11