CAPITAL SPORTS Shineater Manual De Instrucciones página 9

SETUP
First unpack all parts and lay out the parts as shown below. They must be
included:
• 2 sides with the markings „1 5" and „2 6".
• 2 side surfaces („Side") with the markings „3 7" and „4 8
• Top and bottom side with the markings „Bottom 1 2 3 4" and „Top 5-6-7-8"
• 3 inner struts
• 1 package of mounting material incl. 37 screws.
Note: When assembling, make sure that the sides marked with arrows
always represent the outside of the cube. Wood glue is recommended for
proper assembly of this unit.
EN
9