Powakaddy FWII Manual De Instrucciones página 6

GB
There are several features that you can
programme as 'user preferences' within
the on board computer of the FWII.
To enter the programming mode, disconnect the
battery and then reconnect it whilst
simultaneously holding down the
after 5 seconds a programming screen will be
displayed.
Time :
M e t re / Ya rd :
Remote Ctrl : OFF
Battery Type :
Use the arrows to move between the
categories displayed and the
select.
Time – highlight the word time, press the
button. Now use the to move along
the digits of the digital display and the
adjust the highlighted field, once the time is set,
press .
Time Set
0 5 : 4 6
Clock Battery Replacement –
A lithium cell battery is fitted in the handset.
The battery is removable and should be
disposed of in an appropriate recycling facility.
We strongly recommend that removal or
replacement should be done by a PowaKaddy
Service Agent.
button,
Metres/Yards – highlight category and press
. Use
and press
Yards you will also have selected MPH and if
you choose Metres, KPH.
09 : 00
M
Remote Ctrl – Not available
L i
Battery type – use the
the type of battery. Select 'PB' for Lead Acid
battery and 'Li' for Lithium Ion battery.
The wrong setting will not damage your FWII
but the battery indicator will not work properly.
button to
to
Once you have programmed your desired
settings, unplug the battery and the settings
will be saved.
FWII Brake
If you have purchased the FWII Lithium brake
model you will have the added advantage of
a Digital Braking System (DBS).
to select your preferred measure
. Please note that if you select
1 : Metre
2 : Ya rd
arrows to select
1 : Li
2 : P B
The Digital Brake System is activated by pressing
the until you go below zero, the display will
then show either -1, -2 or -3 dependant on the
amount of braking required.
To return to normal speed just press the
until the desired speed is reached
This is not a 100% brake and should not be
used as a parking brake on a steep hill.
52.9 05:49
MILES
YDS
0.0
M P H
000
If, during use, the trolley will
not run in a straight line, the
small front wheel angle can be
adjusted by unlocking the over-
centre lock and turning the
knurled screw to change the
steering angle of the wheel.
Re-adjust until the trolley runs
straight.
Never: Use your trolley if any of the cables and
connections are damaged or frayed.
Never: Use a damaged battery.
Never: Use Digital Distance Function (DDF) on a slope.
Do: Remove the battery from the battery tray before
storing or transporting the trolley.
Do: Ensure that whilst in transit (car boot for
example) the battery cannot move around and that the
terminals of the battery cannot come into contact with
other metal objects/surfaces.
Do: Regularly check your trolley for signs of damage
or wear, all repairs must be carried out by an
authorised Powakaddy Service Centre.
Do: Follow the instructions provided with your battery
and charger.
For information on servicing, lubrication and clock
battery change please go to the website below.
www.powakaddy.com/FW2/support
arrow