Samsung RF31FMESBSL Guia De Inicio Rapido página 11

(12) "I cannot change the gas concentration of the sparkling water."
[ The concentration control function is disabled during a production]
1. Check if the numbers (
it indicates that sparkling water is being produced. Since the sparkling water concentration
cannot be changed during a production operation, change the concentration level when the
production is complete and the blinking stops. Sparkling water at the configured concentration
level will be produced the next time.
(13) "Sparkling water is produced continuously." [The refrigerator door is open or the
sparkling water production time has not been reached.]
1. Has the sparkling water production time been reached?
- The time when sparkling water is generated is determined by the configured concentration.
(Level 1: Approx. 10 mins; Level 2: Approx. 20 mins; Level 3: Approx. 30 mins)
- Please wait until the sparkling water production time has been reached.
2. Check if the refrigerator door is open.
- If the refrigerator door is open, the sparkling water maker stops to prevent noise that is
generated by the sparkling water production.
- For this reason, the time during which sparkling water is produced may be extended according
to the configured concentration.
- Close the refrigerator door and wait until the sparkling water production time has been reached.
DA68-02942A-05.indb 11
) next to the sparkling water icon are blinking. If they are blinking,
English - 11
2018. 7. 31. 2:35