General Description; Warranty - A.E.B. OBDII - µFIX Istrucciones De Montaje

The "OBD II - µFIX" emulator avoids alteration of petrol carburation
during Gas operation. This avoids the Check - Engine warning light
from turning on during Gas operation.
There exist many types of emulators according to different types of
vehicles, it is therefore important to assembly the correct one.
Carefully follow the assembly instructions during the installation of
the emulator.
A wrong connection could cause malfunctions of the emulator.
Moreover, in the case of vehicles provided with dual exhaust system,
thus two sensors upstream of the catalytic converters, it is important
to identify the O2 sensor for bank 1 and the O2 sensor for bank 2 in
order to allow the simulator to work correctly.
NOTE: the bank 1 corresponde to cylinder 1
The "OBD II - µFIX" simulator allows the vehicle's on - board dia-
gnostic system to remain operational. Therefore, if the carbure-
tion is not correct during the alternative fuel operation, the oxy-
gen sensor located downstream of the catalytic converter can
still trigger the engagement of the check - engine light.
Do not use on cars with automatic transmission (eg Ford Kuga
2.5 with automatic gearbox) because the emulator may interfe-
re with the functioning of the transmission device.
The warranty certificate is available on the
website AEB (www.aeb.it) in the products
section/emulators/AEB428.

GENERAL DESCRIPTION

WARNING
WARNING

WARRANTY

.
9