Samsung Galaxy Tab S2 Manual Del Usuario página 538

Bluetooth connections
Pairing with multiple devices
Pair with up to two Bluetooth-enabled devices and easily switch connections between the
keyboard and the paired devices.
Pairing with an additional device
1
Pair and connect the keyboard to a device via Bluetooth.
2
Press and hold the key (F11 or F12) that you did not use to register the previous device
for approximately three seconds to enter Bluetooth pairing mode.
The connection between the keyboard and the previously connected device will end.
3
Follow the same connection procedure used for connecting the previous device to
connect the keyboard to an additional device.
Switching connections
Press the key (F11 or F12).
If the keyboard is currently connected to the device registered to the F11 key, press the F12
key to switch to the device registered to it.
If the keyboard is currently connected to the device registered to the F12 key, press the F11
key to switch to the device registered to it.
This feature may not be available depending on the paired device.
English (USA)
11
9