Honeywell 50250 Serie Importantes Instrucciones De Seguridad página 3

SET-UP
• Select a firm, level and flat location. For best air flow, locate the unit at least 3 feet
(1 meter) from any wall or furniture.
• Due to the large volume of air drawn towards the air purifier, surrounding areas should
be cleaned and/or vacuumed frequently to prevent dust buildup. If the unit is placed
on light colored carpeting, a small mat or rug should be used to ease cleaning and
prevent any permanent staining of carpeting. This is particularly important in homes
with heavier contamination from smoking or fireplaces.
• Locate pre-filter
Refer to "Removing/Changing the Filters" section for proper installation.
OPERATION
• BEFORE OPERATION MAKE SURE PRE-FILTER
Refer to "Removing/Changing the Filters" section for proper installation.
• Ensure the air purifier is plugged into a working electrical outlet and the
Power Knob is turned to the OFF (
• Allow the unit to operate for a few seconds at turbo speed
, then leave the control knob in the turbo position for
faster, more powerful room cleaning, or move the knob to
the day or sleep
It is recommended you
run your air purifier
24 hours a day when
possible to ensure
continuous cleaning.
50150N_50250S_OM.indd 3
in the box and install before initial operation.
) position.
setting for quieter operation.
(SLEEP)
(DAY)
(TURBO)
(OFF)
IS INSTALLED.
3
11/18/10 4:37 PM