Specifications; Leds And Connections - Buffalo SSD-WAT Manual Del Usuario

Specifications

LEDs and Connections

1
Power / Access LED
Power On: white
Accessing: blinking white
Sleep mode: orange
2
Mode Select Switch
Push this button to turn on sleep mode. In sleep mode, the drive will power down but the extra Thunderbolt port
will still be usable and devices connected to it can be accessed. Push the button again to exit sleep mode and
power on the drive.
3
Fan
4
Thunderbolt Ports
Connect one of these to your computer. The other can be connected to an additional Thunderbolt device (daisy
chain).
5
Power Connector
Specifications
Check Buffalo's website (www.buffalotech.com) for information about the latest products or compatible models.
Interface
Connector
Transfer speed
Factory defaults
External dimensions
(excluding protruding parts)
Power consumption
Power
Compatible OS
Note: This product is preconfigured with a striped (RAID 0) array.
Thunderbolt
2 x Thunderbolt
Thunderbolt: 10 Gbps Maximum
HFS+ (Mac OS Extended format)
45 x 102 x 154 mm
24 W Maximum (48 W max when daisy chained)
AC 100 - 240 V 50/60 Hz
Windows 8 (64-bit and 32-bit)
Windows 7 (64-bit and 32-bit)
OS X 10.8, 10.7, 10.6 (models with Intel Processor)
3