Gladiator GAMT41HWJG Instrucciones De Ensamblaje página 5

1.
Attach the Handle
F1
F1. M6 - 1.0 x 15 hex bolt
Position the handle over the threaded inserts on the side of
the cabinet. Attach handle with M6-1.00 x 15 Hex bolts (F1) (4)
and tighten with 10 mm wrench (provided).
3.
Attach the Casters
F2
F2. M8 - 1.25 x 25 hex bolt
WARNING
Excessive Weight Hazard
Use two or more people to move and assemble
workbench.
Failure to do so can result in back or other injury.
Push in all the cabinet drawers fully and lock using the key. Using
two or more people, lay the cabinet down on its back with the
drawers facing upward. Protect the cabinet back finish by laying
it down on the saved cardboard packaging material. Attach the
swivel casters to the cabinet, on the same side as the handle,
using M8-1.25 x 25 hex bolts (F2) (8) and tighten with the provided
12 mm wrench. Attach the fixed casters to the cabinet, on the
opposite side as the handle, using M8-1.25 x 25 hex bolts (F2) (8)
and tighten with the provided 12 mm wrench.
F1
F2
Swivel casters
Fixed casters
2.
Attach Cord Storage Hooks
F3
F3. M6 – 1.00 x 12 pan-head Philips screw
Position the cord storage hooks over the threaded inserts on
handle side of the cabinet. Using M6-1.00 x 12 pan-head Philips
screws (F3) (4) attach the hooks facing opposite of each other.
Tighten the screws with a Philips screwdriver.
F3
5