Denver Electronics JST-9200 Manual Del Usuario página 4

LED Flashlight
Press and hold the ON/OFF button for 3 seconds to switcvh the flashlight
on. Press the ON/OFF button to toggle between On, SOS, Flash and Off
modes.
Jump Start Your Car
Note:
This product is suitable for cars with 12V electric system

petrol or 3.0 L diesel
Check to make sure that 3 to 4 charging indicators are illuminated

(battery level is above 50%) before using the device to jump start
your car.
Step 1: Insert the plug of the smart battery clamp completely into the
jump starter. If the green and red lights on the battery clamp are
flashing alternately, you are safe to move on to the next step.
Step 2: Connect the red clamp to the positive terminal (+) of the car
battery and connect the black clamp to the negative terminal (-) of the
engine) only.
(up to 5.0 L