Denver Electronics JST-9200 Manual Del Usuario página 5

car battery. If the green and red light indicators on the battery clamp are
flashing alternately, you are safe to move on to the next step.
However, if the red indicator light is on:
The battery clamps may be connected in reverse. If so, you need to
1.
disconnect the battery clamps from the vehicle and the jump starter.
2. Adjust the clamps for maximum contact with the battery terminals.
Step 3a: Start your car.
If you failed to start your car, disconnect the battery clamps from the

vehicle and the jump starter. Wait for at least 30 seconds, and then
try again.
If your car failed to start after 3 attempts, use the force start

function. See step 3b.
Step 3b (optional): Force start function. First ensure that the clamps are