Tabla de contenido
Publicidad
Technical specifications (VCM7137/00T / VCM7138/00T)
Pick-up element
Pixel elements
Resolution
Gain control
Lens
Iris
Light sensitivity
Scene illumination
Signal to noise ratio
White balance TTL
System connector (output)
Microphone
•
Frequency range
Synchronisation
Power supply
Power consumption
System-cable length
Dimensions
Weight
Connectors
System cable
•
•
External power
Auto-iris control
Mounting
Ambient temperature
Operating
•
Storage
•
Ambient humidity
Operating
•
•
Storage
Specifications may change without notice.
1/3" solid state CCD
512 (H) x 582 (V), PAL interlaced
330 TVL
automatic, 20dB
Fixed-lens
Electronic iris
0.9 lux minimally acceptable picture with standard lens (F2.0)
•
at 3200K, transmission 86%, scene reflection 100%
7.5 lux, 50ire (-6dB) with standard lens (F2.0) at 3200K,
•
transmission 86%, scene reflection 100%
Not for continuous use above 10k lux
48dB at 200-25000 lux, 25°C
range 2500-6500K
audio: common mode 500mVpp
video: differential mode 175mVpp with pre-emphasis of 12dB at
5MHz In the dual twisted pair system cable one pair carries the
audio signal and the videosignal, the other the power supply
and synchronisation pulses.
Built-in, can be switched off at the camera.
300-3000Hz
The camera automatically synchronises to the system monitor.
Without system monitor the camera generates its own
synchronisation signals.
24V
, when the system-cable length exceeds 200m/600ft a power
DC
adapter (24V
, current limit 500mA) is required (available as
DC
accessory)
≤3W
max. 300m/900ft (when a mains power adaptor is used)
72 (H) x 70,5 (W) x 69,5 (D) mm
183.5g
RJ11E modular ("telephone" plug)
Power jack
4-pole socket
1/4" 20 UNC
-10 to +50°C
-25 to +70°C
20 to 90% RH
up to 99% RH
88
Publicidad
Tabla de contenido
