Lenco DIR-150 Manual Del Usuario página 16

12. FM operation
With your radio on, press the Mode button to select FM mode or press / button to select
FM mode in the menu.
Press the / button to manually tune to specific frequencies by 0.05MHz per step.
The radio also includes the scan feature of FM, allowing you to automatically tune to FM stations.
Press and hold the button to automatically search for the next available radio station. When a
station with good signal is found, it will be automatically played.
You can search for stations in the opposite direction by pressing and holding the button.
Press the Navigate/OK rotary knob, it can automatically scan fully and store the 20 stations (the max).
Storing stations as presets
Radio can store 20 stations as presets in FM mode. To store a preset:
Tune to the station you like, press and hold the Fav button, then using the / button or
rotate the Navigate/OK rotary knob to select desired preset number, then press Vol/Nav/Ok rotary
knob to store the station.
Playing stations saved as presets
To play a preset station:
Select the band FM of the station by pressing the Mode button or press / button to
select FM mode in the menu.
Press the Fav button to recall the preset station, then using the / button or rotate the
Navigate/OKrotary knobto browse through your presets and press the Navigate/OKrotary knob to
confirm.
13. Bluetooth
With your radio on, press the Mode button to select Bluetooth mode or press / button
to select Bluetooth mode in the menu.
Turn on the Bluetooth of your device and choose the pairing name "DIR-150 BT" and click it for
pairing, there will be prompt sound "connected" if Bluetooth connection successful.
You can press or to go to previous track or next track.
You can press navigate knob to play or pause the music playback.
You can adjust the knob clockwise to increase the volume or anti-clockwise to decrease the volume.
You can press and hold the navigate knob to disconnect the existing pairing and pair with new device.
16