ShelterLogic 25768 Instrucciones De Ensamble página 5

3. PlACE COVER OVER ROOF FRAME
Place cover over frame so the grommetted portion is facing down. The valance will cover the frame eaves.
4. ATTACH lEGs TO FEET
A. Connect a leg pole (10043), to each foot plate (10050). Align holes.
B. Insert one long pin (10052) through all eight legs to secure base foot.
Repeat with each leg.
A
5. ATTACH lEGs TO ROOF FRAME
After assembling the legs, lay them next to the canopy near each of the 3 and 4 way connectors.
Attach all legs to one side first. Let the other side of roof frame rest on the ground. Repeat for opposite side.
NOTE: See diagram. Insert one middle leg on one side of the frame, swedged end up. Insert the rest of the
legs on that same side. Repeat for the opposite side.
10043
10050
B
Page 5
Leg Pole Assembly
10043
10050
05-25768-25769-0D