Operating Instructions; Inspection And Maintenance - Bosch T10013 Instrucciones Originales

en-gb | 9 | T10013

3 Operating Instructions

1. Check the fixture for visible damages such as signs
of wear, deformation, breakages, cracks and
corrosion damages prior to each use. Check the
circlip for damage and the correct seat. Check the
function of the fall protection. Do no use the
support when defects are noted and discard it
immediately.
2. Carry out the necessary preparation work for the
use of the holder in accordance with the workshop
manuals.
3. Attach the fixture to the load exactly as described
in the workshop manuals.
WARNING
Danger through tilting or falling of the load!
Incorrect attachment of the support to the load may
cause a tilting or falling of the load! This can cause
serious injuries and damage to materials.
Attach the fixture exactly as described in the
workshop manual.
Check the function of the fall protection.
Check the secure seat of the support prior to lifting
the load.
4. Carry out further work as described in the
workshop manuals.
5. Ensure that all parts of the special tool have been
removed after completing the repair work.
2018-10-05

4 Inspection and Maintenance

Check the fixture for visible damages such as signs
of wear, deformation, breakages, cracks and
corrosion damages prior to each use. Check the
circlip for damage and the correct seat. Check the
function of the fall protection. Do no use the support
when defects are noted and discard it immediately.
Please contact your 1st level support representative
with any queries.
NOTICE
Modifications to this product which have not been
expressly approved by the manufacturer will void any
warranty. The manufacturer assumes no liability for
personal injuries or damages to materials which occur
as the result of improper use of this product.
Bosch Automotive Service Solutions GmbH
Am Dörrenhof 1
85131 Pollenfeld-Preith
Germany